04 08 Grand Prix 3 8l Radiator Replacement Heater Core Flush About press copyright contact us creators advertise developers terms privacy policy & safety how works test new features nfl sunday ticket press copyright. It is a huge plus to flush your entire heating system and maintain it regularly, but you should also flush your heater core too. especially if you have some.
Coolant Flush How To Pontiac Grand Prix 2004 2008 2007 Pontiac Heater core unplugging. 1. open the drain in the radiator and let the coolant drain out. 2. locate the 2 heater hoses and where they connect to the engine underneath the alternator. 2. loose the clamps. 3. remove the hoses from the nipples, using a long flat screwdriver to get in the gap. 05 29 2013. drain coolant via bleeder screw on bottom of radiator, fill with water from hose, start engine for 30 sec or so, drain, and repeat until water comes clear, then fill half with non dexcool (green is popular) and half distilled water. temp light being on is probably not from not changing coolant though, not sure though. 11.remove the heater core cover heat stakes (1) with a small chisel. 12.remove the heater core cover from the hvac module assembly. 1.from the inside of the heater core cover, drill the dimples adjacent to the heat stakes using a 5.5 mm (7 32 in) drill bit. 2.install the heater core cover to the hvac module assembly. Dec 14, 2010. #3. open the bleeder on a cold engine, add as much coolant as it will take through the radiator. close bleeder. run engine and add to radiator as necessary while it warms up. install cap, allow to build pressure and get up to normal operating temp. open bleeder while running at this point.
Coolant Flush How To Pontiac Grand Prix 2004 2008 2008 Pontiac 11.remove the heater core cover heat stakes (1) with a small chisel. 12.remove the heater core cover from the hvac module assembly. 1.from the inside of the heater core cover, drill the dimples adjacent to the heat stakes using a 5.5 mm (7 32 in) drill bit. 2.install the heater core cover to the hvac module assembly. Dec 14, 2010. #3. open the bleeder on a cold engine, add as much coolant as it will take through the radiator. close bleeder. run engine and add to radiator as necessary while it warms up. install cap, allow to build pressure and get up to normal operating temp. open bleeder while running at this point. Sealable container. 1. move the pontiac grand prix to a level area and set the parking brake. move the pontiac grand prix to a level area and set the parking brake. then, pop the hood and touch the radiator. if it's warm to the touch, allow it to cool off before you continue. 2. twist the radiator cap one full turn. Pontiac grand prix, 2008, base 3.8l. canadian car (gm oshawa plant) i am in canada. i have had window fogging and coolant smell in the car for some time. me being me i waited until the carpets were soaked in coolant and all the windows fogged up so bad i could hardly see to get to work. so i have been working to remove the old heater core.
How To Replace Heatercore On 2004 Pontiac Grandprix 3 8 Supercharged Sealable container. 1. move the pontiac grand prix to a level area and set the parking brake. move the pontiac grand prix to a level area and set the parking brake. then, pop the hood and touch the radiator. if it's warm to the touch, allow it to cool off before you continue. 2. twist the radiator cap one full turn. Pontiac grand prix, 2008, base 3.8l. canadian car (gm oshawa plant) i am in canada. i have had window fogging and coolant smell in the car for some time. me being me i waited until the carpets were soaked in coolant and all the windows fogged up so bad i could hardly see to get to work. so i have been working to remove the old heater core.
Coolant Flush How To Pontiac Grand Prix 2004 2008 2004 Pontiac
Consumer Review Video For The 2004 Pontiac Grand Prix Gt1 3 8l V6
Comments are closed.