Business is booming.

3vze Coolant Hose Help Yotatech Forums

3vze Coolant Hose Help Yotatech Forums
3vze Coolant Hose Help Yotatech Forums

3vze Coolant Hose Help Yotatech Forums Likes: 2. 3vze iacv ? that hasn't been asked. coming from a lot of great threads that point to the problem that is the idle air control valve, most fixes revolve around the following found problems: tb coolant hoses clogged for whatever reason (using green coolant and getting rust, or say the rubber from liquid gasket applied somewhere else, etc.). This was pulled from toyotanation forum. i found this excellent for folks trying to maintain the toyota v6 3vze engine. i bought my 89 v6 4x4 x cab in 1995 at 107k miles and now 14 years and 173k miles later, it's still going strong, so you could get a lot of years of good service out of that truck.

Coolant Line For 3vze Yotatech Forums
Coolant Line For 3vze Yotatech Forums

Coolant Line For 3vze Yotatech Forums Tie what remains of your left arm in to seven square knots. squeeze it under the front side of the engine bat and deform it until it reaches the back side. you might consider dehydrating yourself first so that your fingers are the size of a 3 year old's. seriously, i'll take a quick look and get back to you. . Changed coolant, belts, hoses, fan clutch, installed new fan shroud and thermostat (it didn't have one in there, it turns out, but installed a new one). still shows overheating way in the red after about 5 minutes of running and driving it once around the block. but it doesn't "steam". you can actually touch the radiator without getting burned. Other sneaky coolant leak spots include, on the 22re, having the timing chain stretch and wear a hole in the timing cover and leaking coolant into the oil, and, on the 3vze, on the oil cooler (not all veezys have 'em it's a can on the driver side of block, aft of oil filter with a hose leading from water pump). 3vze adjusting idle help please yotatech forums 95.5 2004 tacomas & 96 2002 4runners 3vze adjusting idle help please oh gurus and members smarter than i (that means most everyone here), i want to adjust the idle on my 91 v6 3vze 4x4, as it seems to be idling extremely low and rough.

Coolant Line For 3vze Yotatech Forums
Coolant Line For 3vze Yotatech Forums

Coolant Line For 3vze Yotatech Forums Other sneaky coolant leak spots include, on the 22re, having the timing chain stretch and wear a hole in the timing cover and leaking coolant into the oil, and, on the 3vze, on the oil cooler (not all veezys have 'em it's a can on the driver side of block, aft of oil filter with a hose leading from water pump). 3vze adjusting idle help please yotatech forums 95.5 2004 tacomas & 96 2002 4runners 3vze adjusting idle help please oh gurus and members smarter than i (that means most everyone here), i want to adjust the idle on my 91 v6 3vze 4x4, as it seems to be idling extremely low and rough. Posts: 14. 95' 4runner 3vze myriad of problems (solved) before i start i have already searched the forums for the issues that are currently plauging my vehicle. so lets start with the simple things first, i recently replaced the distributor, tps, and the oxygen sensor. before i replaced the oxygen sensor the idle was up around 2000 2200 rpm. 1994 gray 4runner 3vze. i was pulling the heads to do some valve work and was replacing the head gaskets and other gaskets while i was there. i just got it reassembled and found that i was burning coolant on the number 6 cylinder. i followed the service manual to remove the heads by slowly removing the head bolt in the order that the manual.

3vze Hose Classification Yotatech Forums
3vze Hose Classification Yotatech Forums

3vze Hose Classification Yotatech Forums Posts: 14. 95' 4runner 3vze myriad of problems (solved) before i start i have already searched the forums for the issues that are currently plauging my vehicle. so lets start with the simple things first, i recently replaced the distributor, tps, and the oxygen sensor. before i replaced the oxygen sensor the idle was up around 2000 2200 rpm. 1994 gray 4runner 3vze. i was pulling the heads to do some valve work and was replacing the head gaskets and other gaskets while i was there. i just got it reassembled and found that i was burning coolant on the number 6 cylinder. i followed the service manual to remove the heads by slowly removing the head bolt in the order that the manual.

3vze Coolant Hose Help Yotatech Forums
3vze Coolant Hose Help Yotatech Forums

3vze Coolant Hose Help Yotatech Forums

Comments are closed.