Chevy Transmission Cooler Lines Diagram Bios Pics вђ Rainy Weathers Shop for new auto parts at 1aauto 1aau.to c 182 f transmission oil coolerstransmission cooling lines deliver and return transmission fluid between. Below is a basic silverado and sierra transmission cooler line diagram showing the standard hot (send) and cool (return) lines as the flow through a factory cooler setup. so whether you have a 4.8, 5.3, or 6.0 ls powered truck , an older 5.7 small block, or a more modern truck with an lt motor, the transmission cooler flow is very similar.
Understanding The Chevy Transmission Cooler Lines Diagram All You Need The 4l60e transmission cooler line flow is very easy to follow. as the gif above shows, the bottom line is the hot line which sends warm transmission fluid out to the factory trans cooler within the radiator at the lower port in most cases. fyi, some vehicles have the factory cooler on the bottom of the radiator, but simply follow the lower. The transmission cooler lines are made of metal and connect to the radiator at the transmission cooler inlet and outlet. the inlet is on the driver’s side of the radiator and the outlet is on the passenger’s side. there are two bolts that hold each line in place. the bottom bolt is larger than the top bolt. As already mentioned, the flow direction of the transmission cooler is such that the top hose attachment is the hotline, and the bottom one is the cold line. the hotline is the fluid returning from the transmission, and the cold line is the fluid returning into the transmission. however, that’s just a rule of thumb, so it could be the other. 6l80 transmission cooler flow direction. the transmission fluid low of the 6l80 goes as follows: if you do not have an external transmission cooler, the cooler line flow goes as follows: lower cooler line > lower radiator port > upper radiator port > back to upper transmission line. powered by wordpress and hitmag.
Comments are closed.