Coolingmist Installation In Progress Dodge Srt Forum In this thread in this sub forum in the entire site. advanced search cancel create thread srt 4 technical discussion. The line enters in the car at the left of the clutch pedal. it's a white plastic hose and there is a rubber connector at his end where the line of the boost gauge is connected. unplug the boost gauge line, use a "t" fitting and connect both the boost gauge line and the hose that goes to the w i controller to it.
Coolingmist Installation In Progress Dodge Srt Forum Forums. srt 4 technical discussion. methanol water alky injection. Cam and lifter change out in progress. chimmi; sep 8, 2024; 18 702 oct 2, 2024. by dodge challenger srt 392 forum. 8.2k posts. To view all forums and unlock additional cool features. welcome to the #1 dodge, jeep and ram forum dedicated to fca owners and enthusiasts. register for an account, it's free and it's easy, so don't hesitate to join the srt forum today! forums. challenger forums. Need help w coolingmist wiring for dual stage install. jump to latest dodge srt forum. 9.5m posts 107.4k members since 2002 the community to discuss high.
Coolingmist Installation In Progress Dodge Srt Forum To view all forums and unlock additional cool features. welcome to the #1 dodge, jeep and ram forum dedicated to fca owners and enthusiasts. register for an account, it's free and it's easy, so don't hesitate to join the srt forum today! forums. challenger forums. Need help w coolingmist wiring for dual stage install. jump to latest dodge srt forum. 9.5m posts 107.4k members since 2002 the community to discuss high. Never had a problem in the driving months so only use tender in the winter. disconnect the positive cable under the hood then connect the tender , .75amp. to the end of the positive cable and to the negative post also under the hood. this eliminates any possibility of a draw on the system. have never had a problem. 2002 gts. 1 on old key fob, press and release the "lock" button 5 times in less than 2 seconds. 2 insert the key into the ignition switch and turn it to "on". 3 wait for the dinging ignition alarm to stop. 4 press and hold the unlock button on the working remote for four to six seconds.
Comments are closed.