How To Connect Two Routers In One Network Youtube Write down the ssid (may also be called network name) and password. write down the value of "security mode," "network mode," or "encryption mode." write down the frequency, such as 5 ghz or 2.4 ghz. go to the lan or network section of the router and write down the internet (ipv4) ip address and subnet mask. Lan to wan: change the ip address to 192.168.1.51. notice this is just outside of the dhcp range we set up on the primary router. once the ip address is set, just make sure that the subnet mask matches that of the primary router and that you disable upnp if the option is there. 5.
How To Connect Two Wifi Router By Rashed Ict Youtube When your router has been reset, connect an ethernet cable to lan 1 on the back of the router and the other end to the computer and turn the router on (if it isn’t already on from the reset). open a web browser on the computer and go to the default ip address of the router. this is usually 192.168.0.1 or 192.168.1.1. If router you want to add to your network doesn't support wds, you can't use it to expand your network wirelessly. 3. get an ethernet cable. even though you'll be setting up a wireless network, you will need an ethernet cable so you can configure your two routers from your computer. method 2. Save and apply the settings: click on the “apply” or “save” button to save and apply the changes to the router’s settings. wait for the router to reboot and apply the new configurations. this may take a few minutes. once you have configured the main router, it is ready to connect to the secondary router wirelessly. Connect a second wired router. if the second router doesn't have wireless capability, you must connect it to the first router with an ethernet cable. plug one end of the cable into the new router's uplink port (sometimes labeled wan or internet). plug the other end into any free port on the first router other than its uplink port.
Comments are closed.