How To Pin Plastic Miniatures One Minute Hobby Tips Youtube For the miniature painter on the go, one minute hobby hacks has your back! pin a miniature to a base perfectly every time. support us on patreon : w. Align the pin placement between the miniature and the base. use a pin vice to drill a hole in your model and a corresponding hole in the base. cut a pin to the correct size. dry fit the pin. glue the pin in place. 1. decide where you want to place your miniature on the base.
Hobby Tips How To Pin Metal Miniatures Tabletop Gaming Looking at this miniature arm join, we can see it is a unique hole with a unique piece that fits perfectly. not all joints will operate like this; that is where you can take a look and plan out the weakest areas to pin. in this image, the red arrows indicate a point on the miniature’s right wrist that will connect once the left arm is in place. Look at piece a. look at piece b. turn both around from every angle. decide the rough angle you want the pin paperclip to rest inside the model. drill hole in piece a at roughly that angle (doesn't have to be perfect). stick paperclip into hole to evaluate depth. drill more. Drill into the base where your model needs to be positioned. note the angle of your drilled foot. if you’ve had to drill into the foot at an angle do the same for the base. this is very important to ensure the pin fits and especially important if your base is thick because of extra basing material. Polyurethane wood glue is great for all uses. painted or non painted, based or not based. it expands so use just a few little dabs with a crap old brush or a tooth pick. the bond is solid but is also a little bit rubbery and not brittle. also a great addition to any terrain builders toolkit.
03 Textured Rolling Pin With Green Stuff For Miniature Bases Youtube Drill into the base where your model needs to be positioned. note the angle of your drilled foot. if you’ve had to drill into the foot at an angle do the same for the base. this is very important to ensure the pin fits and especially important if your base is thick because of extra basing material. Polyurethane wood glue is great for all uses. painted or non painted, based or not based. it expands so use just a few little dabs with a crap old brush or a tooth pick. the bond is solid but is also a little bit rubbery and not brittle. also a great addition to any terrain builders toolkit. This is the first in a series of one minute hobby tips starting with how to pin plastic miniaturesyou can now support the channel through patreon w. Personally i often do not attach the mini to the final base. rather i put them on a blank base with some blue tac. and then make the base separately. this stops any washes varnishes needed to be applied to either base or mini to contaminate the other. when i do this the final step is making the mini and base fit blend together with weathering.
Hobby Hacks Heavy Base Weights For Miniatures Youtube This is the first in a series of one minute hobby tips starting with how to pin plastic miniaturesyou can now support the channel through patreon w. Personally i often do not attach the mini to the final base. rather i put them on a blank base with some blue tac. and then make the base separately. this stops any washes varnishes needed to be applied to either base or mini to contaminate the other. when i do this the final step is making the mini and base fit blend together with weathering.
Comments are closed.