Solving Creality K1 Under Extrusion While Also Boosting Performance The creality k1 is a well regarded 3d printer, because it provides very fast printing speeds at a reasonable price. but jón’s k1 experienced a common issue: under extrusion. in his most recent video, jón solved that problem and gave the creality k1 a significant performance boost along the way. creality k1 under extrusion early versions of the […]. It was like a different machine. i’ve since upgraded to a k1 max and it performs great. i hope you get a new extruder which should take care of that problem. creality also put out a firmware update a little while ago for the k1 that mentioned an underextruding issue…. zerquetch september 11, 2023, 2:16am 5.
Solving Creality K1 Under Extrusion While Also Boosting Performance Jón’s solution was to switch the k1 to bowden extrusion, which allows for a very powerful extruder motor and that actually reduces moving mass. by relocating the extruder and extruder motor to the back of the k1, jón eliminated most of the weight on the moving extruder carriage. now it is just the hot end, with the bowden going into the. I show how to easily fix creality k1 under extrusion? ~ ~~ ~~~ ~~ ~ please watch: "bambu lab ams first print with bambu lab p1p: the ultimate multi color 3d. However, the creality k1 is supposed to be able to print much faster than this, so i would think that the extruder would be able to keep up. i have already tried several cold pulls as well as a cleaning needle, so i am fairly certain there isn’t a jam. i am also using creality’s “hyper pla” at around 233 240c. Trouble shooting @creality3d k1 c under extrusion problem. #educational #3dprinting #k1c #creality #crealityk1c i don't have an affiliate link to one yet.
Solving Creality K1 Under Extrusion While Also Boosting Performance However, the creality k1 is supposed to be able to print much faster than this, so i would think that the extruder would be able to keep up. i have already tried several cold pulls as well as a cleaning needle, so i am fairly certain there isn’t a jam. i am also using creality’s “hyper pla” at around 233 240c. Trouble shooting @creality3d k1 c under extrusion problem. #educational #3dprinting #k1c #creality #crealityk1c i don't have an affiliate link to one yet. For several days now, i've been experiencing under extrusion issues with my k1c, whether using orcaslicer or creality print 5.0. i've properly adjusted my extruder and tried modifying the z axis, but nothing seems to work. i've tried various solutions but can't find the answer. i also attempted to reset it with the script, but it didn't change. The filaments are from the same batch and even if i swap the rolls themselves between the k1 and the max, the issue occurs on my max but not on my k1. i am using orcaslicer. retraction 1mm @ 50mm s. temperature 220°c for grey pla filament. 0.04 pa on both printers, extrusion length has been calibrated. both printers are rooted and running.
Comments are closed.