Spalted Maple Stain Options Nc Woodworker Atelier Yuwa Ciao Jp Jul 30, 2020. #10. borg boiled linseed oil (blo) diluted with mineral spirits (about 1:1 or 2:1). put it on and let it soak into the wood and then wipe it off thoroughly several times with plenty of rags. usually 3 4 coats are recommended. i think she might like this. The fungi require high moisture content in the wood to be able to grow and be active. your project will require that your wood be dried down to ordinary cabinet lumber moisture content. so, the spalting will be dormant. a good sealer and finish will lock in anything that might cause smells or contamination from contact.
Spalted Maple Stain Options Nc Woodworker Use a medium thickness glue for small gaps and a thick one for big gaps. after the glue has dried, sand the wood. spalted wood is more easily scratched by sandpaper, so sand up to p600 grit. finally, if you want a clear, non yellowing topcoat, use a water based finish like minwax polycrylic, wet sanding with cami 800 grit paper between coats. Here’s the thing spalted maple isn’t actually rotten. the process that creates spalted wood makes the wood weaker but doesn’t make it rotten. so, if you’re looking for a sturdy piece of wood, spalted maple isn’t the best choice. however, if you’re looking for a beautiful piece of wood with unique patterns, spalted maple is a great. Lacquer or water based varnish are both good choices, but lacquer will provide a more durable finish. water based varnish is easier to apply and will give the wood a softer, more natural appearance. shellac is another option that works well on spalted maple. it’s easy to apply and gives the wood a nice, deep luster. If it works out you can repeat the method on the actual piece. i wonder if you could put the maple you plan to use through a bandsaw, cut it into 3 pieces, maybe wave the line as you cut. then you could stain just the middle piece or outside pieces and glue it back together before cutting out the body outline.
Spalted Maple Stain Options Nc Woodworker Atelier Yuwa Ciao Jp Lacquer or water based varnish are both good choices, but lacquer will provide a more durable finish. water based varnish is easier to apply and will give the wood a softer, more natural appearance. shellac is another option that works well on spalted maple. it’s easy to apply and gives the wood a nice, deep luster. If it works out you can repeat the method on the actual piece. i wonder if you could put the maple you plan to use through a bandsaw, cut it into 3 pieces, maybe wave the line as you cut. then you could stain just the middle piece or outside pieces and glue it back together before cutting out the body outline. Sugar maple leaves. when hunting for spalted maple, for instance, look for standing maple trees. (see the drawing above to identify the sugar maple leaf.) chances are good that any nearby fallen trees also are maples. when you find one, cut into the log with a chainsaw to check for spalted areas. save the best portions, as shown in photos a and. 2407 posts · joined 2010. #3 · may 7, 2015. i've used two styles of finishing for wood tops .1) is multiple thinned coats of clear deft brushing lacquer topped with a hand rubbed wax finish as these tables 2) is waterlox which is already super thin and requires multiple coats also. it can be final coated with which sheen you desire as.
Comments are closed.