How To Install Transmission Cooler Line On Ford Expedition Chefper Reaction score. 655. location. elizebethtown, pa. transmission cooling. the transmission fluid cooling system, without an auxiliary transmission fluid cooler (7a095), consists of: an intank fluid cooler inlet tube (7a030) a non repairable intank transmission fluid cooler. an intank fluid cooler return tube (7a031). Tips to install new transmission cooler lines.
Ford Expedition Transmission Cooler Lines 4r100. hope this helps. the return line to the 4r70w is the top line on the transmission. so the top line on the transmission is the cool line in from the rad. bottom line of transmission is hot line out to the rad. 4r100 front (forward) line on the transmission is the out line (hot) to the rad. the rear line on the transmission is the in line. Location. phoenix, az. trying to beat the heat here in phoenix, i started to track trans temps on my '01 4x4 expedition with 5.4 and 4r100. trans temps were routinely above 200f driving around town with oem trans cooler (towing pkg). hit 220f and higher driving slow speed off road up steep hills in d. such high temps were alarming so i decided. So if the coolant is 220*, then the transmission will likely be at least that. to add a transmission cooler inline with the hx, the proper routing is to place it after the hx radiator and before the transmission return line. the fluid is to be cooled after going through the heat up cycle. Posts: 465. likes: 16. removing those darn trans cooler lines. man oh man are these ever a pain in the neck. they are often the worst part of doing a radiator job on one of these. even if you have the special tool to release them half the time it doesn't work either. they are truly quick connect fitting and not quick disconnect.
Q A 4r100 4r70w Transmission Cooler Line Diagrams For 01 Expedition So if the coolant is 220*, then the transmission will likely be at least that. to add a transmission cooler inline with the hx, the proper routing is to place it after the hx radiator and before the transmission return line. the fluid is to be cooled after going through the heat up cycle. Posts: 465. likes: 16. removing those darn trans cooler lines. man oh man are these ever a pain in the neck. they are often the worst part of doing a radiator job on one of these. even if you have the special tool to release them half the time it doesn't work either. they are truly quick connect fitting and not quick disconnect. Pre installation. identify the two 1 2” npt x 3 8” barb fittings. using teflon tape or suitable sealant, install the two 1 2” npt x 3 8” barb fittings onto the transmission cooler. identify the 11 32” x 4’ hose and hose clamps. slide one hose clamp on each end of the supplied hose. using a dab of oil, lubricate each end of the hose. I will likely do something similar. probably use 6an braided line when i order it for another project on my uncle's v12 bmw on a related note, rock auto says that the 99 super duty excursion use the same radiator (stating 3 8" inverted flare fittings) but a different auxiliary transmission cooler (xl3z 7a095 ea on expedition f150 7700, xc3z 7a095 ca on super duty excursion).
Ford Expedition Automatic Transmission Oil Cooler Hose Assembly Outlet Pre installation. identify the two 1 2” npt x 3 8” barb fittings. using teflon tape or suitable sealant, install the two 1 2” npt x 3 8” barb fittings onto the transmission cooler. identify the 11 32” x 4’ hose and hose clamps. slide one hose clamp on each end of the supplied hose. using a dab of oil, lubricate each end of the hose. I will likely do something similar. probably use 6an braided line when i order it for another project on my uncle's v12 bmw on a related note, rock auto says that the 99 super duty excursion use the same radiator (stating 3 8" inverted flare fittings) but a different auxiliary transmission cooler (xl3z 7a095 ea on expedition f150 7700, xc3z 7a095 ca on super duty excursion).
Transmission Cooler Line Location At Cassandra Booth Blog
Automatic Transmission Cooling System
Comments are closed.